Meco Geprc Gep-Vtx58200-M 5.8g 48ch 0/25/100/200mw Fpv Transmitter 20x20mm Hole For Rc Drone Fpv Racing

GEPRC GEP-VTX58200-M 5.8G 48CH 0/25/100/200mW FPV Transmitter 20x20mm Hole for RC Drone FPV Racing Note: Please install antenna (must be done) before debugging or testing VTX(and OSD) or lead to VTX not working properly. Specification: Brand name: GEPRC Item name: GEP-VTX58200-M FPV Transmitter Channel output : 48Ch(A,B,E,F,H,R) Input voltage : 7-24V DC (2-6S) Vtx output the camera voltage: 5v Power transmission: 0mW / 25mW / 100mW / 200mW Size (mm): 25 * 25 * 4.5 Mounting Holes Dimension:20*20mm Connector type: IPEX Connector Weight: 3.5g(including antenna) Feature: Support Power tuning; Transmit power 4 gear switch: 0mw/25mW/100mW/200mW; The output power is stable ,the far transmission distance: 0.6km@25mW, 1km@100mW, 1.5km@200mW Output 48 frequency points, and has R group 8 race frequency at the same time using each other without interference; Frequency lock fast, boot does not interfere with companions; Full format video format: NTSC /PAL; Wide input voltage range. low power consumption; 7V~24V, +12V/170mA@200mW; Small volume: 25mm25mm4.5mm;mounting holes 20mm20mm(4 * M2) correspond exactly mini CC3D NAZE32 F3 F4 Flying control Light weight: 3.5g(including antenna) How to use: 1. Set the Channel In standby mode, press and hold the key for 3 seconds, the blue LED flashes, short press, change the channel value.Every time 1 press will change the CH, followed by 1CH to 8CH cycles. 2. Set the Band In the channel setting mode, press and hold the key for 3 seconds, the green LED flashes, briefly presses, changes the frequency group value.Every time 1 press will change the band, and then the A band to F band loop. 3. Set the Power In the band setting mode, press and hold the key for 3 seconds, the red LED flashes, short press, change the output power value.Every time 1 press will change the power, followed by 25mW / 100mW / 200mW cycle. Packae Included: 1 x GEP-VTX58200-M FPV Transmitter