Meco Charsoon Antimatter 300w 20a Balance Charger Discharger For Lipo Nicd Pb Battery

Charsoon Antimatter 300W 20A Balance Charger Discharger For LiPo/NiCd/PB Battery Description: The Charsoon Antimatter 300W charger is a powerful charger for its size. This high power balancing charger/discharger can provide up to 20A charge rates and handle up to 6S Li-po/LiFe or 17S NiCd/NiMH battery. The Charsoon Antimatter 300W has great features such as storage charging, cyclic charging / discharging, 10 charge parameter memory and can also be set up as a convenient power supply for a hot wire foam cutter. Specification: Brand Name Charsoon Model Number Antimatter Input Voltage DC: 10-28V Charge Current 0.05 ~ 20A Discharge Current 0.05 ~ 20A Maximum Charge Capacity 300W@input voltage>18V Maximum Discharge Capacity 20W Maximum Regenerative Discharge Power Capacity 300W Maximum Extern Discharge Power Capacity 500W@25V/20A Current Drain For Balancing LiPoly <350mAh/cell Balance Accuracy <10mV Battery Setup Memory 10 Lithium (Li-poly/LiIo/LiFe) Cell Count 1 ~ 6 series NiCd/NiMH Cell Count 1 ~ 17 series Pb Battery Voltage 2 ~ 24V Log Files Storage 16Mbit (36 hours) Intelligent Temperature Control Yes Dimensions 140 x 95 x 27mm Weight 350g Features: High Power,High Current,High-Performance Power Conversion Circuit This charger uses advance Synchronous buck-boost DC/DC converter technology with an output conversion efficiency that can reach over 90%. This is not only save power and reduce heat build up but also makes the charger more compact and conveniently mobile. Support Many Kinds of Battery The charger can be used with Lipo,Lilo,LiFe,Ni-Cd,NiMH and Pb battery. Data Storage Convenient set of 10 battery profile memories that can be saved and loaded by number, Various Charging/Discharging Settings and Cycles For lithium batteries: balance charging,normal charging,fast charging,storage,discharging,ext-discharging,charge/discharge cycling and battery monitoring. For NiCd/NiMH batteries: charging-auto,charging-manual,discharging,charge/discharge cycling and forming charge. For Pb batteries: charging and discharging. Unique Lithium Battery Expanding Discharging Program When you connect the external capacity resistance,you can use it as the maximum discharge power capacity - 600W(30V/20A). Unique Lithium Battery Monitor Program When you use other equipment to charge or discharge a Lithium pack,you can use the charger to monitor the per-cell voltages,battery temperature and process time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the process has gone on for too long,the charge will generate an alarm sound and the related information will blink. Foam-cut Drive In this mode,the charge acts as a convenient power supply for a hot wire foam cutter. Battery Interior Resistance Measurement The charger can not only measure the internal resistance of the battery pack,and also can measure the per-cell internal resistance (only available for lithium battery). Perfect Protection Function The charger has protection for reversed polarity(input or output),low input voltage,battery temperature,charging capacity and time overrun. Electric Motor Test Mode This mode can be used to run-in electric motors,test motor parameters and performance,check tolerances etc. Flash Storage The charger has a 16Mbit flash storage,which can log offline charge and discharge data in 36 hours. English Manual,Click Here Note: This charger doesn't come with the AC adapter and cord. Package Included: 1x Charsoon Antimatter 300W charger 2x Alligator Clips +/- 1x XT60 connector charge lead 1x T connector charge lead 1x JST / Futaba Charge Lead