Matek H743-WLITE Flight Controller Ingebouwde OSD 2-6S ArduPilot INAV Open Source voor FPV Drone RC Vliegtuig

Specificaties:Brand Name: MatekItem Name: H743-WLITEMCU: STM32H743VIH6, 480MHz , 512KB RAM, 2MB FlashIMU: ICM42688-PBaro: DPS310 (I2C2)OSD: AT7456EBlackbox: MicroSD card slot (SDIO)7x Uarts (1,2,3,4,6,7,8) with built-in inversion.13x PWM outputs(12+LED)6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)2x I2C1x CANUSB/Beep Extender with Type-C(USB2.0)Dual Camera Inputs switch9V(12V) for VTX power switchHigh-precision Current Sense, 220A rangeADC VB2 voltage divider: 1K:20KADC AirSpeed voltage divider: 20K:20KFC FirmwareINAV: MATEKH743ArduPilot: MATEKH743PDBInput voltage range: 6.8~30V (2~6S LiPo)1x ESC power padsBattery Voltage divider 1K:20K (Scale 2100 in INAV,BATT_VOLT_MULT 21.0 in ArduPilot)Current Senor: 220A,3.3V ADC(Scale 150 in INAV,66.7 A/V in ArduPilot)Sense resistor: 90A continuous, 220A peakBEC 5V outputDesigned for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeedContinuous current: 2 Amps, Max.3ABEC 9V /12V outputDesigned for Video Transmitter, Camera, Gimbal ect.Continuous current: 2 Amps, Max.3A12V option with Jumper padfor stable 9V/12V output, input voltage should > output voltage +1VBEC Vx outputDesigned for ServosVoltage adjustable, 5V Default, 6V or 7.2V via jumperContinuous current: 8 Amps, Max.10Afor stable Vx output, input voltage should > Vx voltage +1VBEC 3.3V outputDesigned for Baro / Compass module and external 3.3V peripheralsLinear RegulatorC