Beitian BE-122 GPS Module Met Antenne UBX M10050 Chip Ultra-low Power Drone UAV GNSS Ontvanger Module voor FPV Return Re

Specificaties:Merknaam: Beitian Artikelnaam: BE-122Chip: M10050Frequency: GPS L1 C/A, QZSS L1S (SLAS), BDS B1I/B1C, Galileo E1B/C, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGANWorking Mode: GPS+GALILEO+SBAS+QZSS joint positioning.Tracking Sensitivity: -166dBmReacquisition Sensitivity: -160dBmCold Start Sensitivity: -148dBmHot Start Sensitivity: -160dBmPosition Horizontal Accuracy: 1.5 m CEP 2D RMS SBAS Enable (Typical Open Sky)Speed Accuracy: 0.05m/sDynamic Heading Accuracy: 0.3 deg1PPS Time Accuracy: RMS 30ns, 99% 60nsCold Start Acquisition Time: 27sHot Start Acquisition Time: 1sAuxiliary Start Acquisition Time: 1sData Output Support Rate: 4800bps to 921600bps, Default 38400bpsData Output Level: TTL LevelData Output Protocol: NMEA, UBXData Output NMEA Message: RMC, VTG, GGA, GSA, GSV, GLLData Output Update Rate: 0.25Hz-18Hz, Default 1HzData Output Second Pulse: 0.25Hz-10MHz can be configured, the default period is 1s, and the high level lasts for 100msOperational Altitude Limits: 80000mOperational Speed Limits: Operational Acceleration Limits: Power Consumption of VCC: DC Voltage 3.6V-5.5V, Typical: 5.0VPower Consumption of Current: Capture 50mA/5.0VAfmeting: 16,3 mm * 12,4 mm * 4,4 mmWeight: 3gOperating Temp: -40 °C ~ +85°CStorage Temp: -40°C ~ +105°CPPS LED: Red. PPS LED not bright when GPS not fixed, flashing when fixed.Pin Beschrijving:PINPIN-naamIOBeschrijvingkarakteristiek1RXIUART communication interface, TTL levelGPS data input pin2TXOUART communication interface, TTL levelGP