Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Engine Toys

Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Engine ToysDescription:Brand:EachineName:Eachine ET6 Horizontal Hit and Miss Complete Engine ModelSize:180*125*125mmDisplacement:6ccCylinder Diameter:22mmItinerary:20mmWeight:1610gMaterial:Brass And Stainless SteelThis is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working.The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine.You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. Features:Engine startup steps:1.Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate.2.Fill the fuel tank with gasoline (95#). When the filling is completed, make sure there is no air in the oil pipe.3.on the right side of the engine (installation of the flying hammer position), slowly turn counterclockwise by hand to buy more than one turn, its role can make the mixed gasoline fully enter the cylinder.4.Turn on the power switch and turn the flywheel to start the engine counterclockwise on the right side of the engine (i