Meco Matek Systems Betaflight F405-Aio Stm32f405 Flight Controller Built-In Pdb 5v/2a & 9v/2a Dual Bec

Matek Systems BetaFlight F405-AIO STM32F405 Flight Controller Built-in PDB 5V/2A & 9V/2A Dual BEC Specifications (User manual): Brand name: Matek Systems Item name: BetaFlight F405-AIO PCB: 2.3MM, 6 layers & 2oz copper Size: 36x51mm PCB with 30.5mm mounting holes & XT60 socket Weight: 12g FC Specifications: MCU: 168MHz STM32F405 IMU: 32K ICM20602 accelerometer/gyro (SPI) Max. 32K Gyro update & 16K PID Loop OSD: BetaFlight OSD w/ AT7456E chip Blackbox: MicroSD card slot (SD/SDHC) VCP, UART1, UART2, UART3, UART4, UART5 Built in inverter for SBUS input (UART2-RX) PPM/UART Shared: UART2-RX SoftSerial on S5 & S6 optional Smartaudio & Tramp VTX protocol supported Spektrum BIND_PIN: RX4 WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes PDB Specifications: Input: 9~27V (3~6S LiPo) w/TVS protection PDB: 4x30A (Max.4x50A) 6 layers*2oz copper PCB Dual BEC: 5V 2A & 9V 2A LDO 3.3V: Max.300mA for Spektrum RX Current Sensor 200A (Scale 165) Battery Voltage Sensor: 1:10 (Scale 110) Features: 2x LEDs for FC STATUS (Blue, Red) 6x PWM / DShot outputs without conflict 5x UARTs 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible) 1x pair I2C1 pads (for INAV firmware only) 1x Side-press button for BOOT(DFU) mode package included: 1x Matek Systems BetaFlight F405-AIO 1x Rubycon ZLH 35V/470uF (Low ESR) 4x M3 Anti-vibration Standoffs 1x FR4 PCB Plate 36*36*1mm