Crius All In One Pro V2.0 Multi-Copter Flight Control Board

General: Dimension: 50mmX50mm Height: 11.6mm Weight: 14.2g Fixing hole spacing: 45mm Hole diameter: 3mm Features: Supported MegaPirateNG and MultiWii firmware Up to 8-axis motor output 8 input channels for standard receiver 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry 2 servos output for PITCH and ROLL gimbal system A servos output to trigger a camera button 6 Analog output for extend device A I2C port for extend sensor or device Separate 3.3V and 5V LDO voltage regulator ATMega 2560 Microcontroller MPU6050 6 axis gyro/accel with Motion Processing Unit HMC5883L 3-axis digital magnetometer MS5611-01BA01 highprecision altimeter FT232RQ USB-UART chip and Micro USB receptacle On board logic level converter Match the standard of RoHS Flight mode for Multiwii: One of the following basic mode Acro Level Alt Hold Head Lock Optional mode HeadFree (CareFree) GPS Hold (Need GPS receiver or Extend Board) GPS Back to home position (Need GPS receiver or Extend Board) Flight mode for MegaPirate: Acro Alt Hold Simple Loiter (uses GPS) Guided (uses GPS) Position (uses GPS) Circle (uses GPS) RTL (uses GPS) Auto(uses GPS) Follow Me(uses GPS) Input power selection: One of the following way Connect 5V power cable from ESC or UBEC to the ESC/Servo port, the J1 jumper must be closed. Connect 5V~12V power cable to the extend power port, the J1 jumper must be removed. When using Extend Board, AIO PRO must be powered from the extend power port. Package Include: 1 x Crius All In One Pro v2.0 Multi-Copter Flight Control Board