Eachine1 Apm Current&voltage Sensors For Apm2.5/2.6/2.8 Px4 Flight Control 3 In 1

APM Current&Voltage Sensors For APM2.5/2.6/2.8 PX4 Flight Control 3 In 1 Description: Item Name:APM Current&Voltage Sensors Voltage Input:2S-6S Voltage Sampling: 10/1 Output sub-line: 6-way BEC Output: 5.3V / 3A (PWM switching) Installation pitch: 45mm x 45mm External dimensions: 50mm x 50mm Usage:for APM2.5/APM2.6/APM2.8/PX4 Flight Control Features: Integration of galvanometer,UBEC,sub panels as a function of APM current&voltage sensors Compatible with APM2.5/APM2.6/APM2.8/PX4 Flight Control PCB using double-sided 3 times copper immersion gold process,excessive current is stable and reliable The onboard 5.3V / 3A switching power supply UBEC Current and voltage sampling circuit compatible 3DR galvanometer, without calibration, you can connect flight control and simple settings then it can be used Using methods: Board marked B + B- is to connect the battery input terminal,the output terminal is six pairs of pads arranged side by side,respectively + - as a standard for welding ESC power lines. Make sure that the correct welding. Galvanometer connect with APM through a 6PIN signal cable,APM terminal please insert labeled PM's 6 hole socket,and unplug the JP1 jumper cap. Prevent galvanometer power supply and power transfer in parallel which is not allowed, unless your ESC does not have BEC output. Special Note: Compatible with standard version APM,please pay attention to the line sequence of APM and distributor wiring board. After connecting,set the current&voltage sensors in the following photo in the MP then it can be used. Package Included: 1 x 3 in 1 galvanometer board 1 x 15cm 14AWG red silicone cord 1 x 15cm 14AWG black silicone cord 1 x XT60 battery connector plug(1 pair) 1 x 6PIN power supply signal line(1 set) 1 x Heat Shrink Tubing(1segment)