Electric Unicycle Charger Ac To Dc Power Supply For Tg Unicycle

INPUT CHARACTERISTICS: (1) Input Voltage Input Voltage Range :100Vac-240Vac Nominal Voltage Range : 100Vac-240Vac (2) Input Frequency : Nominal Frequency: 50/60Hz. Variation Frequency :47/63Hz (3) Max. Input Current : 1.74Arms max At any input voltage and rated. DC output rated load (4) Ac Leakage Current: 1.2 mA Max. At 240Vac input. OUTPUT CHARACTERISTICS : (1) No load input Power Input AC Voltage : Output Power load 100Vac Less than 2.2W 240Vac Less than 2.6W (2) Output Voltage Range Input AC Voltage Range: 100Vac-240Vac Output Voltage Range: 37.1V-67.2 Vdc +/-1% load Range: 0.22A-1.95A (3) Output Power Voltage:+67.2Vdc Min. Load: 0.22A Max. Load:1.95 A Peak:131W (4) Combined Load/Line Regulation : Voltage +67.2Vdc Min. Load 0.22 A Max. Load 1.95A Line Regulation 1% Load Regulation (5) Efficiency: 85% Min. At 100Vac input and output Max. Load. When 110Vac input and output maximum load minimum 80% . When 220Vac input and output maximum load minimum 82%. (6)Turn the lamp current: 250-350mA PROTECTION FUNCTION: 1.The power supply will be auto recovered when short circuit faults remove. 2. Over current Protection: The power supply will be auto recovered when over current faults remove.. 2.1. Over Voltage Protection The output shall be protected to latch off at over-voltage condition, maximum value can't be over 72V. That might be return to normal state by AC reset . The reset time must less than 2min . 2.2. Short Circuit protection Output can be shorted without damage. The adaptor shall be auto-recovery. (It will enter into normal condition when the fault condition is removed.) 3. Battery polarity Reverse polarity protection When the battery polarity is reversed, the charger automatically cut off the output, the output voltage is 0. When troubleshooting, the normal polarity connection, the charger will resume normal operation. Package Include: 1* Charger Note:fit for TG-T3 ,TG-M3,TG-F3 model unicycle