Meco Cycplus T1 Pro Multi-Pattern App Diy Smart Bicycle Taillight Brake Warning Monitoring Ip56 78g Bluetooth 4.0 Connection Large Display Range With Remote Control

Specifications: Brand: CYCPLUS Model: T1 Pro(with Remote Control) Size: 110mm*78mm*32mm Weight: 78g Protection Level: IP56 Battery InformationL: Tail Light: 350mAh Rechargeable Li-Polymer + 190mAh LIR2477 Remote Control: 120mAh CR1632 Using Duration Range: About 10hours Charging Time: 1hours Charging Mode: USB Phone Requirement: Support Bluetooth 4.0 System: Android 4.3 & above; iOS 8.0 & above Instruction 1. About Installation: (a) According to the shape of the seat tube, select the appropriate sillcone pad; (b) Combine the sillcone pad with the tail light; (c) Use the plastic belt to fix the tail light on the seat tube; (d) Use the rubber ring to fix the remote control on the handle bar; (e) Turn on the power switch of the tail light and click any button of the remote control. 2. About function: (a) Click left button:Display left turn pattern; (b) Click right button:Display right turn pattern; (c) Double-click left button:Display last pattern; (d) Double-click right button:Display next pattern; (e) Long press left button 2 sec:Switch display mode; (f) Long press right button 5 sec:Disconnect the bluetooth connection between the remote control and the tail light, so that the APP can connect the tail light via bluetooth. 3.About Brake Warning: This product has a brake monitoring function.The tail light will display brake warning pattern when the remote control monitors the brake behavior. About charging: (a)The tail light has two power supplies and two charging ports; (b)Separate the motor part from the fixed part as shown on the left; (c)Use the charging cable to charge the motor part and the rotating part; (d)The charging indicator of the motor part inside the charging port will turn red in the charge process and turn green when the power supply fully charged; (e)The charging indicator of the rotating part is one of the 15 LEDs.It will turn red in the charge process and go out when the power supply fully charged. About APP: (a)Scan the QR code to download the APP; (b)Ensure the bluetooth connection between the remote control and the tail light is disconnected.Use the APP to connect the tail lightbluebooth. About Bluetooth: The remote control and the tail light have been paired when the product left the factory.The remote control will restore the default settings when it is power off.The remote control should be paired with the tail light again.Please turn on the power switch of the tail light and click any button of the remote control to pair them.If the remote control pairs with other wrong devices, you should try again after reinstalling its battery and making it far away from other wrong devices. Package Includes: 1 x Tail Light 2 x Sillcone Pad 1 x Remote Control 1 x Charging Cable 4 x Plastic Belt 2 x Rubber Ring