Meco Solmor 3m Smd2835 White Waterproof Dimmable Led Strip Light Dc12v With Hand Wave Sensor

Specification: Voltage:DC12V The maximum load power:24W LED chip:SMD2835 Light color:white The dimming range:8-100% Induction distance:5-10CM Sensor shell color:milky coating Switch type:hand wave sensor Strips IP rating:IP65 Sensor IP rating:IP20 Operation Temperature: -20~+55 Material:PC Sensor size:45*25*10.5mm Strips length:3M Feature: 1.Turn down/turn off: The light is off after connect the power supply. When the hand wave from the inducing area(vertical dimension 1-8cm),the light is turn on. And wave again, the light is turn down. 2.Brightness adjustment: The brightness of light could be adjusted freely from 8% to 100%.When the hand stay on the inducing area above, the light will get dimmer until minimum 8% brightness(Assuming the brightness of the light is 100%). And the hand stay on the inducing area above again, the light will get brightness until 100%. You can leave your hand when get you wanted brightness also. 3.Simple and easy to install. 4.Application area:cabinet, cest, wall cabinet, lift, corridor and so on. NOTE: 1.Avoid the sensor getting wet. Package included: 1*LED light strip 1*hand wave sensor 1*instruction 1*adapter