N000520 EIB KNX 360° Presence Detector incl. bus coupling unit special offer

Manufacturer-number: N000520 - The differences and most important advantages of a presence detector compared with a motion detector (simple light measurement, malfunction caused by artificial light) are the universal application thanks to the special and permanent light measurement (daylight and/or mixed light measurement). The light value measurement is executed by a special sensor which disposes of a spectral sensitivity similar to the human eye. Another advantage is the complete 360° room monitoring without any obstacles (for ceiling installation) with one single detector. The detector can capture an area of approx. 16x16 meters with the movement detection, a pure presence detection covers approx. 6x6 meters. When installed on the ceiling vandalism and theft by simply removing the detector is almost impossible. This is particularly important for public buildings. Larger rooms can be equipped with additional detectors based on the Master/Slave Function. Switching the 4 Pyro detectors on or off via ETS permits to influence the detection which can again be adjusted individually by sensitivity parameters. Applications: Semi or fully-automatic corridor lighting or basic lighting control with restricted and manual operation as well as scene control for each room, particularly in apartment rooms, offices and spare rooms, bathroom/WC, corridors and staircases etc., control of workplace lighting, switching and dimming functions, HCV (Heating, Climate, Ventilation) presence control, simple alarm functions, hotel room control, server room monitoring (activating cameras, light or alarm functions, access control etc.). When installed on the ceiling ideal for rooms with limited installation options (glass or metal walls). photographed by EIB3D.COM KNX Universal Presence Detector 360 incl. Bus Coupler Extraordinary price-performance ratio with impressive quality and software features (ETS). The KNX Universal Presence Detector 360 with integrated KNX/EIB connection is the latest in the world. With its 4 pyro-detectors (can be switched on and off separately via ETS!) and a high-resolution lens it captures the smallest movement and evaluates each signal with a first-class electronic system controlled by a micro-controller. For concealed ceiling installation a usual case (flat is sufficient) is required or an optional surface installation cap can be used. Download database ETS... , Features/Assembly Using the presence detector application software for the ETS the following operating modes can be parameterized: Light control channel: After detecting a movement the detector sends a 1-frame or an adjustable dimming value (0...100%). If there is no movement the presence detector sends - after an adjustable follow-up time - a 0-frame or a second adjustable dimming value (0100%). Control channel HLK (Heating, Air-Conditioning, Climate): This output is only activated after the verification of 2 to 20 consecutive monitoring windows of equal length in which at least one movement was detected. Thanks to the possibility to parameterize sensitivity the detector can also be used for simple alarm functions e.g. for one-family or appartment houses in Home-Automation (no VDS alarm system permit, there is no s abotage protection and multiple pulse counter). Master- or Slave Mode: Can be configurated by parameterizing by means of ETS. After an adjustable release time the detector returns to its standard condition. Your advantages - Passive infrared (PIR) presence detector for ceiling installation with integrated KNX/EIB connection. - 4 Pyro-detectors and one high-resolution lens capture the smallest movements - Full or semi automat: As a full automat the light is switched on or off automatically depending on presence and brightness. - N000520