N000406 Eib Knx Eno Radio Bus 32f. Special Sale 1 Pcs. Available

Manufacturer-number: N000406 - Not compatible with Hoppe!The gateway just acts one directional. This means that the communication between two participants isnt bidirectional (two-sided). Each communication partner just sends information without being informed from receiving partner that the message has been received. Each channel just receive messages from EnOcean devices and send them to the bus. When using bidirectional gateways radiograms can be send at EnOcean devices via the bus and the gateway. KNX ENO Radio bus interface (32-channel) Interface between EnOcean and EIB/KNX, on-wall mounting Application KnxEno 610 has 32 channels that can be assigned with the following EnOcean sensor functions: - Switching / Dimming - Blinds / Shutters - Temperature sensor - Window contact - Light sensor - Motion detector EIB/KNX learn mode The EIB/KNX learn mode is activated and deactivated using the button next to the bus terminal. A red LED indicates that learn mode is active. Configuration takes place on the ETS and must be performed before the EnOcean telegrams are learned. EnOcean learn mode Brief pressure on the left button on the top switches the device into learn mode. In this mode, a sending EnOcean device is connected to a channel, if allowable. Every channel can be assigned up to four EnOcean IDs depending on the function. Repeated brief pressure on the button skips through the channels. The LCD displays the current channel numbers alternately with the number of connected EnOcean IDs. Extended pressure on the left button clears all connections of the active channel. Brief pressure on the right button causes all communications objects associated with this channel to be sent on the EIB bus. The learn mode is terminated by extended pressure on the button or by inactivity of at least 5 minutes. Normal mode If the associated EnOcean sends a telegram, the channel number is briefly displayed on the LCD. Download database ETS... , Technical data  , ,Electrical safety  , ,- Protection class (as per EN 60529): IP 20  , ,- Safety extra low voltage SELV 24 VDC  , ,Compliant with EN 50090-2-2  , ,EMC requirements  , ,- Compliant with EN 61000-6-2, EN 61000-6-3 and EN 50090-2-2  , ,Ambient conditions  , ,- Climatic stability: EN 50090-2-2  , ,- Ambient operating temp.: - 5 ... + 45 °C  , ,- Storage temp.: - 25 ... + 70 °C  , ,- Rel. humidity (not condens.): 5 % ... 93 %  , ,Labeling  , ,- KNX / EIB  , ,- CE compliant with EMC requirements (residential and functional buildings)  , ,Hardware data  , ,- Housing: plastic, white  , ,- On-wall mounting  , ,- Dimensions: 70 x 70 x 27 mm  , ,- Weight: approx. 70 g  , ,- Fire load: approx. 1000 kJ  , ,Power supply  , ,- Powered via bus  , , , ,Current consumption: approx. 25 mA  , ,Connections  , ,- EIB/KNX connection  , ,Supported EnOcean devices  , ,- See perating and installation instructions Manufacturer: EIBMARKT GmbH Item number: N000406 photographed by EIB3D.COM KNX ENO Radio bus interface (32-channel) Interface between EnOcean and EIB/KNX, on-wall mounting Application KnxEno 610 has 32 channels that can be assigned with the following EnOcean sensor functions: - Switching / Dimming - Blinds / Shutters - Temperature sensor - Window contact - Light sensor - Motion detector EIB/KNX learn mode The EIB/KNX learn mode is activated and deactivated using the button next to the bus terminal. A red LED indicates that learn mode is active. Configuration takes place on the ETS and must be performed before the EnOcean telegrams are le - N000406