Altenburger 80.14.550 Assigner (room Divider Control) Ibas

Manufacturer-number: 80.14.550 - Assigner (room divider control) IBAS for DIN rail distribution boards The assigner (room divider control) is a plugin module for DIN rail cabinets. It allows the joint or individual control of rooms which can be separated by room dividers. A voltage free wall contact or a master switch indicates if the room divider is open or closed. If a room divider is closed the actuators in the individual rooms are controlled by the respective local sensors. If the room divider is opened the sensors would control additionally to the individual room also the actuators in other rooms. The sensors and actuators on the left and right of each room divider consequently are in operation in a parallel mode. Via a low-power LED the switch condition of the assigner can be indicated. With a voltage-free normally open and normally closed contact of a relay other back indications can be made. Description of the component functions as they are pre-adjusted in the data base Through the opening of the room divider contact (normally open type) the LED is switched ON and the relay picks up. This means that the room divider is open. The two side by side rooms now are operating in a master mode. For each individual room maximal the values of 7 objects are transmitted. In the standard adjustment of the parameters the objects are not used always two objects of one function are assigned, one for side A of the room divider and the other for side B of the room divider. The 7 objects are including 5 objects with the size of 1 bit, 1 object with the size of 4 bits and 1 object with a size of 1 byte. At the 1 bit objects different functions can be selected (ON/OFF, jalousie, dark roller blind, curtain, screen, venetian blind). At the 4 bit object the dimming function can be selected. The 1 byte object can be used for the function of the light level or for the scene control within the Altenburger programmable dimming control system. The object 14 transmits a telegram at the opening or closure of the room divider. At the opening an ON telegram is sent, at the closing an OFF telegram is sent. This object is suitable for the parallel control of several devices or for the monitoring of the room dividers e.g. in combination with the visualization. Technical data EIB-supply Voltage : 24 V DC Load capacity : 0.1 W Input per channel : voltage-free contact, switch Output per channel, relay : 1 voltage-free normally open contact, 250V~/8A 1 voltage-free normally closed contact, 250V~/8A Output per channel LED : for low-power LED max. 1.5 mA Ambient temperature : max 45°C with natural convection (in a vertical position) Terminals : 0.5 - 1.5 mm², solid wires or litz wires with sleeve Wire length : max. 100 m Construction : Plastic casing for mounting on a DIN Rail system Dimensions : W x H x D = 90 x 90 x 61 mm Weight : 190 g Protective type : IP 20 Contamination level : 2 (dry, non-conductive, in compliance with IEC 664, 10/92) CE-requirements : EMC fulfilled in compliance with EN 61547 (04/96), Low-voltage in compliance with IEC 669-2-1 11/94 Assigner (room divider control) IBAS for DIN rail distribution boards The assigner (room divider control) is a plugin module for DIN rail cabinets. It allows the joint or individual control of rooms which can be separated by room dividers. A voltage free wall contact or a master switch indicates if the room divider is open or closed. If a room divider is closed the actuators in the individual rooms are controlled by the respective local sensors. If the room divider is opened the sensors would control additionally to the individual room also the actuators in other rooms. The sensors and actuators on the left and right of each room divider consequently are in operation in a parallel mode. Via - 80.14.550