Altenburger 80.14.402 Ir-Decoder-/programmer Unit

Manufacturer-number: 80.14.402 - IR-DECODER / PROGRAMMER UNIT IBIR-P for DIN Rail distribution boards The IR-decoder-/programmer unit is a plugin module for DIN rail cabinets. It converts the electrical signals of the respective IR-sensors into bus-telegrams. With handheld IRtransmitters e.g. ON/OFF switchings, jalousie controls, dimming controls, scene selections, scenes and cleaning light programms etc. can be executed. Up to 6 IR-pre-amplifier can be connected to one IBIR-P. Also several handheld IR-transmitters can be assigned to one IBIR-P. The required functions of the individual keys as well as the assignment of levels can be adjusted via the EIB-tool software. Via the assignment of levels several IR-transmitters with identical key functions can send different commands to one IBIR-P. With one IBIR-P up to 3 programmable dimming controls as well as additional functions like ON/OFF and jalousies can be operated. For the extension of the functions up to 3 IBIR-P can be connected in parallel to the IR-sensors. The IR-decoder-/programmer unit has 2 service LEDs. The LED receipt indicates the receipt of signals of the IR-sensor. The LED evaluation signalizes the sending of bus-telegrams: the handheld IR-transmitter corresponds with the parametrizing and the respective object is interconnected. The module additionally has a 12V DC outlet. This outlet can be used for the supply of other modules, e.g. switch-dim actuators 1-10V. The aforementioned functions are adjusted with the ETS software through the input of the respective parameters. Description of the module functions as they are pre-adjusted in the data base: The standard adjustment of the parameters corresponds with the operation and programming of a programmable dimming control system. These are the functions:ON/OFF, dimming, scene selection, program dimming and fade time/programming. The codes for the IR-transmitter are parametrized on the standard level 3 while the positions of the keys are parametrized on the Altenburger standard (please refer to our the IR-selection and the IR-programmer). The other parameters are not adjusted to any function. Consequently the objects are not displayed. Technical data EIB supply Voltage : 24 V DC Load capacity : max. 0,1W External supply Voltage : 230V AC 50/60 Hz Power consumption : approx. 1W Output : 12 V DC/ max 20mA Input : max. 6 IR-sensors Basic isolation according to IEC 664 (10/92) no protective extralow voltage Ambient temperature : max. 45°C with natural convection (in a vertical position) Terminals : 0,5 - 1,5 mm², solid wires or litz wires with sleeve Wire length : max. 100 m Construction : plastic housing, for DIN rail mounting Dimensions : W x H x D = 72 x 90 x 61 mm Weight : approx. 200 g Protective class : II (Protective isolation) Protective type : IP 20 Contamination level : 2 (dry, non-conductive, in compliance with IEC 664, 10/92) CE-requirements : EMC fulfilled in compliance with EN 61547 (04/96), Low-voltage in compliance with IEC 669-2-1 11/94 IR-DECODER / PROGRAMMER UNIT IBIR-P for DIN Rail distribution boards The IR-decoder-/programmer unit is a plugin module for DIN rail cabinets. It converts the electrical signals of the respective IR-sensors into bus-telegrams. With handheld IRtransmitters e.g. ON/OFF switchings, jalousie controls, dimming controls, scene selections, scenes and cleaning light programms etc. can be executed. Up to 6 IR-pre-amplifier can be connected to one IBIR-P. Also several handheld IR-transmitters can be assigned to one IBIR-P. The required functions of the individual keys as well as the assignment of levels can be adjusted via the EIB-tool software. Via the assignment of levels several IR-transmitters with identical key functions can send different commands to one - 80.14.402