Altenburger 80.13.064 Dimmer (1channel) For Electr. Transf. 60-1400va, Mdrc

Manufacturer-number: 80.13.064 - Phase-interval controlled pushdimmer, MDRC (1 Channel, 60-1400VA) With scene modulus (IBDA 1400-0/P) The ALTODIM 1400-0 is a plug-in module for DIN rail cabinets. If it receives EIB-telegrams it would control the connected Ioad in a phase-interval control mode from 0 to maximum of the brightness. The device is suitable for the control of incandescent lamps as well as lowvoltage halogen lamps with electronic transformers with the load capacities between 40 and 1400 W/VA. Conventional, wire-wound transformers or inductive loads may not be connected. The load output has an electronic current limiting, a light level reduction in case of an exceeding of a limit temperature and a switch-OFF function at inadmissible high temperatures. As soon as the temperature is cooled down the ALTODIM switches ON again after the functional switch-OFF mode. Additionally the control has an input for common pushbuttons (230 V ~). This input can be used as an independent EIB-push-sensor. Several pushbuttons can be operated in parallel. Description of the component functions as they are pre-adjusted in the data base: After receipt of a "1-telegram (object 0) the brightness jumps to that value which was set before the switch "OFF function. A Status back indication would not be set. The brightness can be dimmed via object 1 and 2 within a range of 0% and 100%. For this procedure the dimmer requires approx. 3,2 sec. If the dimmer is switched "OFF" the switch "ON function applies if the command dimming brighter of object 1 as well as with a value of object 2 is switched "ON. The pushbutton input of the dimmer is pre-adjusted for the 1-push-switch/dim function. At a short touch of the pushbutton ( 400 ms) dimmer commands (object 4) are being sent. At a voltage return the brightness goes to the same level as before the voltage failure and the pushbutton input is kept synchronous to this value. Technical data Voltage : 24V DC (+6 / -4V) Input : max. 230mW at 29 V DC External supply Voltage : 250V~ 50Hz Own consumption : Note:Delivery costs and discounts are displayed clearly in the cart (click on icon cart symbol) depending on the currently selected payment methods, mode of shipment and value of goods as well as country and address. Phase-interval controlled pushdimmer, MDRC (1 Channel, 60-1400VA) Without scene modulus (IBDA 1400-0) The ALTODIM 1400-0 is a plug-in module for DIN rail cabinets. If it receives EIB-telegrams it would control the connected Ioad in a phase-interval control mode from 0 to maximum of the brightness. The device is suitable for the control of incandescent lamps as well as lowvoltage halogen lamps with electronic transformers with the load capacities between 40 and 1400 W/VA. Conventional, wire-wound transformers or inductive loads may not be connected. The load output has an electronic current limiting, a light level reduction in case of an exceeding of a limit temperature and a switch-OFF function at inadmissible high temperatures. As soon as the temperature is cooled down the ALTODIM switches ON again after the functional switch-OFF mode. Additionally the control has an input for common pushbuttons (230 V ~). This input can be used as an independent EIB-push-sensor. Several pushbuttons can be operated in parallel. Description of the component functions as they are pre-adjusted in the data base: After receipt of a "1-telegram (object 0) the brightness jumps to that value which was set before the switch "OFF function. A Status back indication would not be set. The brightness can be dimmed via object 1 and 2 within a range of 0% and 100%. For this procedure the dimmer requires approx. 3,2 sec. If the dimmer is switched "OFF" the switch "ON function applies if the command dimming b - 80.13.064