Meco Atgm332d-5n Gps Module With Flight Control Eeprom Instead Of Neo-M8n Support Sma/ipx

Product Description: ATGM332D-5N series module is 12X16 size high performance BDS / GNSS constellation positioning guide Aerospace module series. The series of modular products are based on the fourth generation of low power GNSS SOC Single chip-AT6558, support the United States GPS, China's BDS (Beidou satellite navigation system) ATGM332D-5N series module with high sensitivity, low power consumption, low cost and other advantages, for car navigation, handheld positioning, wearable equipment, you can directly replace the NEO-M8N, package size and pin definition is fully compatible. Performance: Excellent positioning navigation, support BDS / GPS / GLONASS satellite navigation system single system positioning, and any combination of multi-system joint positioning, and support QZSS and SBAS system Support for A-GNSS Cold start capture sensitivity: -148dBm Tracking sensitivity: -162dBm Positioning accuracy: 2.5 meters (CEP50, open ground) First time: 32 seconds Low power consumption: continuous operation <25mA (@ 3.3V) Built-in antenna detection and antenna short circuit protection Assisted GNSS (Assisted GNSS, AGNSS): ATGM332D-5N series modules all support the auxiliary GNSS (AGNSS) function. AGNSS can provide the receiver with the necessary auxiliary information, such as text, rough location and time. Whether in strong or weak signal environments, this information can significantly shorten the first positioning time. The specific use of the way see "in the micro-AGNSS solution" description. Output protocol output protocol: ATGM332D-5N series module through the UART as the main output channel, according to NMEA0183 protocol format output, the specific information, please refer to "CASIC multi-mode satellite navigation receiver protocol specification." Package included: 1 x ATGM332D-5N GPS Module 1 x IPX interface active antenna 1 x SMA socket 1 x 5-pin