Meco 2.4g Wireless Network Module Uart Wireless Serial Port Module Cc2530 Zigbee Smart Home

Description: Chip selection: CC2530 Operating frequency: 2400-2450MHz Communication interface: UART serial port: 2400/4800/9600/14400/19200/28800/38400/57600/115200/230400/125000/250000/500000 Maximum number of hops: 15 hops Single-hop transmission distance: 70 meters (open) The number of points that can be accommodated is 190, and when the network tends to be dense, the number of nodes decreases and the minimum is 96 Maximum packet length: 63Byte (including port address information) Transmission capacity: the transmission rate is the maximum when only one node to send data: because the packet routing information will take a certain amount of bandwidth, the longer the length of each packet, send the higher efficiency. when each packet contains 3Byte data: 2400Bit / s; when each packet contains 30 bytes of data: 10KBit / s. Maximum transmission rate: 250KBit / s Packet retransmission times: up to 15 times, when the network load is high, at least 5 times Air delay: between nodes is single hop, less than 10mS Transmit power: 4.5dBm Operating voltage: 2.5V-3.6V Operating current: less than 30mA Antenna interface: PCB Package included: 1 x 2.4G Wireless Network Module