HangJiaSheng 480W Dual Digitaal beeld DC Switching Power Supply Current Limit Adjustable voltage 0-5V 12V 24V 36V 48V 60V 80V 120V 22

Nominaal vermogenDigitaal beeldAdjustable KnobItem ID480WSpanningSpanning1908262SpanningSpanningInput - housing: AC1500V, 1min; Output - Case: DC500V, 1minWorking environment:-10 °C ~ 50 °C; 20% ~ 90% RH (no condensation)Shell Material: Metal case / Aluminum caseSize: 215 x 115 x 50mmTerminal description and wiring method: L, N AC input terminal FG ground mark V+ DC output positive terminalV-DC output negative terminal ADJ adjustable potentiometer Fine-tuning output DC voltageOperational use:(How to limit current) to adjust current?1. Operate in the case of power failure, pull the small pull switch in the lower left corner to the current regulating gear2. Pull out (dedicated current regulating insert) to the 2nd and 3rd ports of the wiring port, loosen the port screw with a screwdriver, and tighten with a screwdriver (at this time, connect to the listed power), and then connect The voltage of the meter shows 0.00V, and the current shows the current current parameter. At this time, the power supply will emit a small current.3. On the right side (adjust current knob), you can adjust the desired current limit parameter, and display the current parameter synchronously with the digital display. 0-21A/0-16A/0-11A/0-6.5A can be adjusted in the whole process.4. Remove the (special adjustment current plug) and insert it back into the original insert card holder. After removing the digital display, the voltage is about 0.90V, and the current is 0.00A.5. Pull the pull switch in the lo