Meco ARM STM32 Cortex-M4 STM32F4DISCOVERY Development Board With 17 Modules

ARM STM32 Cortex-M4 STM32F4DISCOVERY Development Board With 17 Modules Introduce: STM32 development board designed for the ST official tool STM32F4DISCOVERY, and integrates various standard interfaces, pretty easy for peripheral expansions. Feature: On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging) Two push buttons: (user and reset) Board power supply: through USB 5V or from an external 5 V / 3V supply voltage USB OTG FS: Micro-AB Audio Driver: CS43L22 (audio DAC with integrated class D speaker driver) Extension header for all LQFP100 I/Os for quick connection to prototyping board and easy probing Sensor: LIS302DL (ST MEMS motion sensor, 3-axis digital output accelerometer) MP45DT02 (ST MEMS audio sensor, omni-directional digital microphone) Indicator: LD1: USB communication indicator LD2: 3.3V power indicator LD3: Application Indicators LD4: Application Indicators LD5: Application Indicators LD6: Application Indicators LD7: USB OTG LED (VBus) LD8: USB OTG LED (over-current) STM32 STM32F407VGT6: Kernel: Cortex-M4 32-bit RISC Memory: 1024KB FLASH, 192 KB RAM Package: LQFP100 The new interface features: Can achieve USB HS function through USB HS ULPI The User Guide CD includes development resources listed as follow: Related software (KEIL etc.) Demo code (examples in C, C/OS-II) Schematic (PDF) STM32 development documentations (Datasheet etc.) Note: This product is actually equipped with what modules need to refer to the product configuration details. (The pictures only indicates that this product can support such modules, does not mean that with them) This product is actually how to connect the module, need to be based on the actual situation of this product. Package included: 1 x STM32F4DISCOVERY 1 x 3.2inch 320x240 Touch LCD (A)(FSMC, SPI) 1 x USB3300 USB HS Board(ULPI) 1 x DP83848 Ethernet Board(ETH) 1 x NandFlash Board (A)(FSMC) 1 x OV7670 Camera Board(DCMI) 1 x PL2303 USB UART Board (mini) 1 x Micro SD Storage Board (not included SD card) (SDIO/SPI) 1 x AT45DBXX DataFlash Board(SPI+IOs) 1 x FM24CLXX FRAM Board(I2C) 1 x UDA1380 Board(I2S+I2C) 1 x VS1003B MP3 Board(SPI+IOs) 1 x Analog Test Board(AD/DA function) 2 x SN65HVD230 CAN Board(CAN) 2 x NRF24L01 RF Board (B)(SPI+IOs) 1 x 1.5m cable 1 x USB Type A male mini-B cable(Host) 1 x USB Type A female mini-B cable(Slave) What's on the STM32F4DISCOVERY: 1. STM32F4DISCOVERY socket: for easily connecting the STM32F4DISCOVERY 2. USART2 interface: easily connects to RS232, RS485, USB TO 232, etc. 3. SPI1/SPI2 + AD/DA interface --easily connects to SPI peripherals such as DataFlash (AT45DBxx) SD card, MP3 module, etc. --SPI1 features AD/DA alternative function, supports connecting AD/DA module as well 4. CAN1 interface: communicates with accessory boards which feature the CAN device conveniently 5. CAN2 interface: communicates with accessory boards which feature the CAN device conveniently 6. I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574) FRAM (FM24CLxx) etc. 7. I2S2 / I2S3 / I2C1: for connecting I2S peripherals, such as Audio module 8. DCMI interface: for connecting camera module 9. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI 10. FSMC + SPI interface (16-bit FSMC + SPI): for connecting touch screen LCD 11. FSMC interface (8-bit FSMC): easily connects to peripherals such as NandFlash, Ethernet, etc. 12. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc. 13. ULPI interface: for connecting high-speed USB peripheral (the STM32F407V integrates USB HS controller without any PHY device) 14. Ethernet interface: easily connects the MCU to ethernet network by using an additional ethernet module 15. 5V DC jack 16. 5V/3.3 V power input/output: usually used as power output, also common-grounding with other user board 17. MCU pins connector: all the MCU pins are accessible on expansion connectors for further expansion 18. JTAG/SWD interface: for debugging/programming 19. SD Card Detect jumper 20. Joystick jumper --short the jumper to connect the joystick to default I/Os used in example code --open the jumper to connect the joystick to custom I/Os via jumper wires 21. Boot mode switch: for configuring BOOT0 pin 22. LCD backlight adjustment enable jumper --short the jumper to enable LCD backlight adjustment --open the jumper to disable, and set free the I/O port 23. AMS1117-3.3: 3.3V voltage regulator 24. Power supply switch: 5V DC on/off switch 25. Power indicator 26. Joystick: five positions